Radio Purple Ride is a free ride app for the original Peloton Bike tablet (the first Bike, not Bike+). It plays simple built-in rides and can play the Radio Purple News podcast.
This app is unofficial. It is not made by Peloton, it is not sold by Peloton, and it is not affiliated with Peloton. It does not need a Peloton class subscription to open.
Free software. Use at your own risk. Radio Purple Ride is provided free, as is, with no warranty of any kind. You install and use it entirely at your own risk, and Radio Purple and its owners are not responsible for any damage, data loss, injury, or other harm from installing or using it.
Ride at your own pace. Keep your hands available for the handlebars.
Let a bot install it for you
This is the easy way. You do not type commands.
- Sign up for Grok Bot: Get Grok Bot.
- In your new Grok Bot chat, paste this: Read https://radiopurple.com/pelo/bot-install.md and walk me through installing Radio Purple Ride on my original Peloton Bike, one step at a time.
- Chat with it. It walks you through each step: turning on developer mode on the bike, connecting the bike to the same Wi-Fi as your computer, and installing the app.
Have the bike turned on, and have your computer on the same home Wi-Fi, before you start the chat.
Do it yourself
Use this if you would rather install it by hand.
You need:
- The original Peloton Bike tablet. It runs Android 11. Bike+ is a different tablet.
- A Mac or Windows computer.
- The app file. Download it from https://radiopurple.com/pelo/pelo-public-1.3.3.apk and keep the name
pelo-public-1.3.3.apk. - Android’s small “platform-tools” folder, which contains the
adbprogram. Download it from developer.android.com/tools/releases/platform-tools. Unzip it. You will run commands from inside that folder.
Turn on developer options on the bike
- On the tablet, open Settings → System → About tablet.
- Tap Build number seven times. Enter the tablet PIN if it asks.
- Go back to Settings → System → Developer options.
- Turn on USB debugging.
- Turn off Verify apps over USB if you see it.
- For a cable-free install, turn on Wireless debugging. Write down the IP address and the two port numbers. One port is for pairing. The other is for connecting. They are not the same.
The original Bike tablet is Android 11, so Wireless debugging is there. It was added in Android 11. Older Android tablets do not have it.
Wireless debugging only works when the bike and the computer are on the same Wi-Fi. Guest Wi-Fi and some routers block it. The pairing code expires quickly. After a restart, wireless debugging often turns off and the port can change. If it will not connect, use a micro-USB data cable. A charge-only cable will not work.
The bike’s sensor cable should stay plugged in. If the normal Peloton screen hides Settings, the language setup screen is another way to open Settings.
Install with a cable
Plug a micro-USB data cable from the tablet to the computer. On the tablet, tap Allow if it asks about USB debugging.
Mac — open Terminal:
cd ~/Downloads/platform-tools ./adb devices ./adb install -r ~/Downloads/pelo-public-1.3.3.apk ./adb shell am start -n com.peloclasses.ride/.MainActivity
Windows — open Command Prompt:
cd %USERPROFILE%\Downloads\platform-tools adb devices adb install -r %USERPROFILE%\Downloads\pelo-public-1.3.3.apk adb shell am start -n com.peloclasses.ride/.MainActivity
Install over Wi-Fi
Use the address and ports from the Wireless debugging screen. The numbers below are only an example.
Mac:
cd ~/Downloads/platform-tools ./adb pair 192.168.1.20:37123 ./adb connect 192.168.1.20:39555 ./adb install -r ~/Downloads/pelo-public-1.3.3.apk ./adb shell am start -n com.peloclasses.ride/.MainActivity
Windows:
cd %USERPROFILE%\Downloads\platform-tools adb pair 192.168.1.20:37123 adb connect 192.168.1.20:39555 adb install -r %USERPROFILE%\Downloads\pelo-public-1.3.3.apk adb shell am start -n com.peloclasses.ride/.MainActivity
adb pair asks for the Wi-Fi pairing code on the tablet. You only pair once. Later, use adb connect with the current connection port, then install.
Check that it installed
The app name is Radio Purple Ride.
Mac: ./adb shell pm path com.peloclasses.ride
Windows: adb shell pm path com.peloclasses.ride
If it worked, that prints a line starting with package:. Open the app. The first screen asks Who is riding? Pick Rider 1 or Rider 2. You can add a rider and type a name if you want. Each rider’s rides stay separate.
The built-in rides are general classes. The podcast button is Radio Purple News. You can subscribe at radiopurple.com.
Update
- Download the new file from https://radiopurple.com/pelo/pelo-public-1.3.3.apk.
- Connect the same way.
- Run
adb install -ragain with the new file.
-r means replace the copy you already have. Riders and rides stay if the new file is signed the same way. If Android says the signatures do not match, uninstall first, then install. Uninstalling removes rides saved only on the tablet.
Go back to stock / factory settings
Do this only if you want the tablet back the way Peloton ships it. You can stop after uninstalling, or after turning developer options off. A factory reset is the last step.
1. Uninstall Radio Purple Ride
On the tablet: Settings → Apps → Radio Purple Ride → Uninstall.
Or from the computer, while adb is connected:
Mac: ./adb uninstall com.peloclasses.ride
Windows: adb uninstall com.peloclasses.ride
Success looks like the word Success. Your Peloton account is not deleted. Rides saved only inside this app are deleted.
2. Turn developer options back off
- Open Settings → System → Developer options.
- Turn off Wireless debugging.
- Turn off USB debugging.
- Turn off the Developer options switch at the top of that screen.
3. Factory reset the tablet
A factory reset erases what is stored on the tablet: this app, Wi-Fi passwords, and developer options. You will have to sign back into Peloton and join Wi-Fi again. Workout history that Peloton keeps in your account comes back after you sign in. Anything that lived only on the tablet does not.
From Settings (when the screen works):
- Open Settings → System.
- Open Advanced, then Reset options. If you do not see Advanced, look for Reset options directly under System.
- Tap Erase all data (factory reset) and confirm.
- Join Wi-Fi and sign in to Peloton.
With the buttons (when you cannot open Settings). The power and volume buttons are on the top edge of the touchscreen.
- Shut the tablet down. Hold power and tap Shut down. If the screen is frozen, unplug power, wait about 15 seconds, and plug it back in.
- Hold Volume up. Keep holding it.
- Press Power until the screen turns on and you see the Peloton logo or a boot menu. Then let go.
- If a menu says Select Boot Mode, use Volume up to move to Recovery and Volume down to choose it. The screen may say No command. That is normal.
- On that screen, hold Power, tap Volume up, then let go of Power. A text menu appears. This can take a couple of tries.
- Highlight Wipe all user data / factory reset and press Power.
- Highlight Yes — delete all user data and press Power.
- Highlight Reboot system now and press Power.
- Sign back into Wi-Fi and into Peloton. A download progress number that starts over is normal.
Troubleshooting
| What you see | What to try |
|---|---|
adb devices shows nothing | Use a data cable. Unlock the tablet. Tap Allow. Or adb connect with the connection port, not the pairing port. |
unauthorized | On the tablet, tap Allow, then run adb devices again. |
device offline | Unplug and plug the cable, or turn Wireless debugging off and on, then connect again. |
connection refused | You used the pairing port for connect, or the port changed. Copy the connection port again. Same Wi-Fi. |
| Pairing code rejected | The code expired. Get a new code on the tablet. |
Signature error or INSTALL_FAILED_UPDATE_INCOMPATIBLE | Uninstall Radio Purple Ride, then install again. |
| Install blocked | Turn off Verify apps over USB, then adb install -r again. |
| No icon, but install said Success | adb shell am start -n com.peloclasses.ride/.MainActivity |
On a Mac, if adb is not found, you are not in the platform-tools folder, or you forgot the ./ in front of adb.
Disclaimer
Free software. Use at your own risk. This app is provided free, “as is,” without warranty of any kind, express or implied. To the fullest extent allowed by law, Radio Purple and its owners are not liable for any damage to your bike or tablet, data loss, injury, or other harm arising from installing or using it. It is not a Peloton product. Sideloading and developer options are outside Peloton’s normal setup and may affect your warranty. A factory reset clears tablet settings. Ride safely: stay in control of the bike, and stop if something feels wrong. This app does not give medical advice.
Facts for the installer bot
Paste this into the bot’s knowledge. Leave the placeholders exactly as written.
- App name: Radio Purple Ride. Package: com.peloclasses.ride. File: pelo-public-1.3.3.apk.
- APK download URL: https://radiopurple.com/pelo/pelo-public-1.3.3.apk
- Get Grok Bot: https://grok.com/refer/bot?code=MXXXGXZ73YST
- Installer bot template: https://radiopurple.com/pelo/bot-install.md
- Unofficial app for the original Peloton Bike tablet. Not made by Peloton. Not affiliated with Peloton. Android 11. Not Bike+.
- Wireless debugging exists on Android 11 and newer only. Same Wi-Fi required. Pairing port and connection port are different. Pairing code expires. Wireless debugging often turns off after reboot and the port can change. Guest Wi-Fi can block it. Micro-USB data cable is the fallback. Charge-only cables fail.
- Developer options: Settings → System → About tablet → tap Build number 7 times → Settings → System → Developer options. USB debugging on. Verify apps over USB off. Wireless debugging on for Wi-Fi install.
- Platform-tools: https://developer.android.com/tools/releases/platform-tools
- Mac: ./adb devices — ./adb pair IP:PAIRING_PORT — ./adb connect IP:CONNECTION_PORT — ./adb install -r ~/Downloads/pelo-public-1.3.3.apk — ./adb shell am start -n com.peloclasses.ride/.MainActivity — ./adb shell pm path com.peloclasses.ride — ./adb uninstall com.peloclasses.ride
- Windows: adb devices — adb pair IP:PAIRING_PORT — adb connect IP:CONNECTION_PORT — adb install -r %USERPROFILE%\Downloads\pelo-public-1.3.3.apk — adb shell am start -n com.peloclasses.ride/.MainActivity — adb shell pm path com.peloclasses.ride — adb uninstall com.peloclasses.ride
- Install worked when pm path prints package: and the first screen says Who is riding? with Rider 1 and Rider 2.
- Uninstall: Settings → Apps → Radio Purple Ride → Uninstall.
- Debugging off: Wireless debugging off, USB debugging off, Developer options switch off.
- Factory reset menu: Settings → System → Advanced → Reset options → Erase all data (factory reset). Reset options may sit directly under System.
- Factory reset buttons: Shut down or unplug 15 seconds. Hold Volume up, press Power until the logo or boot menu, then release. Volume up moves, Volume down selects Recovery. No command is normal: hold Power, tap Volume up, release Power. Wipe all user data / factory reset, Yes, Reboot system now. Sign back into Peloton.
- Factory reset erases tablet-only data (this app, Wi-Fi, developer options). Sign back into Peloton. Account workout history returns after login. Tablet-only data is gone.
- Errors: empty devices list; unauthorized (tap Allow); offline; connection refused (wrong port); expired pairing code; INSTALL_FAILED_UPDATE_INCOMPATIBLE (uninstall first); install blocked (Verify apps over USB).
- Disclaimer: use at your own risk. Not a Peloton product. Sideloading may affect warranty. Ride safely.